GYTA G.652D shielded single-mode outdoor fiber optic cable

The 250 μm fibers are placed in a loose, high-modulus plastic tube. The tubes are filled with a water-resistant filler compound. A steel wire, sometimes coated with polyethylene (PE) for cables with a high fiber count, is positioned in the center of the core as a metallic strength member. The tubes (and fillers) are twisted around the reinforcing element into a compact, circular cable core. An aluminum polyethylene laminate (APL) is applied around the cable core, which is filled with the filler compound to protect it from water ingress. The cable is then completed with a PE sheath.

Good mechanical and temperature performance.
High-strength, hydrolysis-resistant loose tube
Special tube filling compound that guarantees critical fiber protection
The specially designed compact structure is good for preventing loose tubes from shrinking.
The PE sheath protects the cable from ultraviolet radiation
Suitable for outdoor antenna, pipe laying method.
Storage/operating temperature: -40 °C to +70 °C

1. FTTH interior y exterior
2. Suitable for both overhead and indoor placement methods.
3. Local and long-distance area network communication.