Wholesale Price 2021 Fiber Optic ADSS - Single Mode ADSS All Dielectric Fiber Optic Cable 12 24 48 96 Base for Antenna – AIXTON

DETAIL

ADSS is a type of fiber optic cable that contains no conductive metal elements. It is used by electric utility companies as a communication medium, installed along existing overhead transmission lines and often sharing the same support structures as electrical conductors.

ADSS is an alternative to OPGW with lower installation costs. The cables are designed to be strong enough to allow installations of up to 700 meters between support towers.

The ADSS cable is designed to be lightweight and of small diameter to reduce the load on tower structures due to the weight of the cable, wind, and ice.

In the cable design, the internal glass optical fibers are supported without tension to maintain low optical loss throughout the cable's lifespan. The cable is sheathed to prevent moisture from degrading the fibers. The sheath also protects the polymer strength elements from the effects of ultraviolet sunlight.

Using single-mode fibers and light wavelengths of 1310 or 1530 nanometers, circuits up to 100 km long are possible without repeaters. A single cable can carry up to 144 fibers.

Features

1. It can be installed without cutting off the power supply;

2. Excellent AT performance, the maximum inductive voltage at the operating point of the AT sheath can reach 25 kV;

3. Lightweight and small diameter which reduces the load caused by ice and wind and the load on towers and supports;

4. Large sections and the largest section is over 300 m;

5. Good tensile strength and temperature performance;

6. The design life is 20 years.

Applications

Adopted for self-supporting outdoor area installation

Long-distance communication, local backbone, CATV and computer networking system, telecommunications or outside plant campus backbone applications

Ethernet LAN network, CCTV, network camera, PLC

Mechanically robust cable design for: Antenna, conduit

Parameter

Photos