We are happy to answer any questions, please send us your inquiries and orders.
The fiber optic patch cable to the remote base station antenna consists of duplex LC cable with a matte outer jacket to withstand harsh environmental conditions when used outdoors, and a round duplex long-range transmission cable (aramid fibers that block water and an opaque, UV-resistant jacket). Its open LC baffle allows easy access to the SFP module for single-path BBU to RRU.
1. Standard duplex LC connector, properly connected with standard LC adapter
2. Single and multi-mode available
3. IP67 protection, salt spray proof, moisture proof, dust proof. Low insertion/return loss, constant optical transmission.
4. Lightweight, waterproof, dustproof, moisture-proof, hard metal casing.
FTTH.
| Fiber count | Cable dimension mm | Cable weight kg / km | Of tension north | Crush N / 100 mm | Min. Radio dubbing mm | Temperature range | |||
| Long Term | Little Term | Long Term | Little Term | Dynamic | Static | ||||
| 2 | 7.0 | 42.3 | 200 | 400 | 1100 | 2200 | 20D | 10D | -30-+70 |
| 4 | 7.0 | 42.3 | 200 | 400 | 1100 | 2200 | 20D | 10D | -30-+70 |
| 8 | 7.0 | 42.3 | 200 | 400 | 1100 | 2200 | 20D | 10D | -30-+70 |
| Note: 1. All values in the table, which are for reference only, are subject to change without notice; 2. The dimension and weight of the cable are subject to the simplex cable of 2.0 outer diameter or 0.9 mm of adjusted damping. 3. D is the outer diameter of the round cable | |||||||||
1. A single-mode fiber core cladding buffer
| Article | Unit | Specification |
| Attenuation | dB/km | 1310nm≤0.4 1550nm≤0.3 |
| Dispersion | Ps/nm.km | 1285~1330nm≤3.5 1550nm≤18.0 |
| Zero dispersion wavelength | Nm | 1300~1324 |
| Zero dispersion slope | Ps/nm.km | ≤0.095 |
| Fiber cutoff wavelength | Nm | ≤1260 |
| Modal field diameter | One | 9.2±0.5 |
| Concentricity of the modal field | One |
|
| Lining diameter | one | 125±1.0 |
| Non-circular coating | % | ≤1.0 |
| Cladding/Cladding Concentricity Error | One | ≤12.5 |
| Layer diameter | one | 245±10 |
| flexion, induced dependence | 1550nm, 1turns,32mm diameter 100rums,60mm diameter | ≤0.5 db |
| attenuation | kpsi | ≥100 |
2. Connector Specification
| ARTICLE | PARAMETER |
| Connector type | LC / UPC. LC / UPC |
| Loss of insertion |
|
| Loss of return | > = 50db |
| Fiber mode | Single mode 9/125 |
| Operating wavelength | 1310nm, 1550nm |
| Wavelength test | 1310nm, 1550nm |
| Repeatability |
|
| Interchangeability |
|
| Durability |
|
| Fiber length | 1m, 2m… any optional length. |
| Length and tolerance | 10cm |
| Operating temperature | -40C ~ + 85C |
| Storage temperature | -40C ~ + 85C |



By Carlos from Ethiopia - 2018.11.22 12:28
By Pandora from Monaco - 2017.06.19 13:51 




Mr. Herry
Phone/Wechat/Whatsapp:+8618123897029
Skype: sales09@aixton.com
Mr James
Phone/Wechat/Whatsapp:+8618566291592
Skype:aixton05