High Quality 12 Core Fiber Optic Cable - G.652D 48 Core Opgw Aerial Fiber Optic Cable – AIXTON

DETAIL

OPGW Stainless Steel Braided Tube

1. High-quality standards for designing, testing, and producing with available Grade A materials to ensure long-term reliability.

2. Engineering support by monitoring and providing its own line of accessory hardware.

3. Seal the stainless steel tube with superior protection to the optical fiber against moisture and extreme environmental conditions such as lighting.

4. To build OPGW, power must be cut off, resulting in greater loss, so OPGW should be used in the construction of high-pressure lines over 110kv.

5. Apply to the transformation of old lines.

Stainless steel (Al coated) OPGW center tube

1. High-quality standards for designing, testing, and producing with available Grade A materials to ensure long-term reliability.

2. Engineering support by monitoring and providing its own line of accessory hardware.

3. Higher tensile strength and fault current capacity to achieve a better balance between electrical and mechanical performance.

OPGW Aluminum Tube

1. Good anti-corrosion performance.

2. The material and structure are uniform, with good resistance to vibration fatigue.

3. Short-circuit current has a small effect on the transmission properties of optical fiber.

4. Good anti-fading performance.

Features

Braided stainless steel tube

- The wire strands are replaced by stainless steel tubes filled with fiber

- The fiber tubes are helically twisted along the cables.

- The fiber deformation margin increases in relation to central tube designs

- Loaded buckling can be increased without inducing tension in the fiber.

Compact design

- Reduced weight – Greater flexibility

- Smallest minimum radius of curvature

- Easier to handle and install

Lower wind and ice loads put less stress on structures

Applications

• Stainless steel tubes filled with hydrophobic gel provide protection and support to the optical fibers

• Good traction performance

• Small diameter, light weight, little additional load on the tower.

• Excess fiber length suitable for the optical unit is easy to manufacture.

Parameter

Optical characteristic parameter

Photos