High-quality ADSS fiber optic cable - All self-contained dielectric fiber optic cables G652D ADSS fiber optic cable – AIXTON

Product Introduction

ADSS cable is a loose-tube, stranded cable. The 250 μm fibers are placed in a loose tube made of high-modulus plastics. The tubes are filled with a water-resistant filler compound. The tubes (and fillers) are stranded around a non-metallic FRP (fiber-reinforced plastic) core, which acts as a central strength element, within a compact, circular cable core. After the cable core is filled with filler compound, it is covered with a thin inner PE (polyethylene) sheath. Following the application of a braided layer of aramid yarns over the inner sheath as a reinforcing element, the cable is completed with an outer PE or AT (anti-tracking) jacket.

The actual condition of overhead power lines is taken into account when designing ADSS cable. For overhead power lines below 110 kV, a PE outer jacket is used. For power lines of 110 kV or higher, a specific outer jacket is used. The dedicated design of the aramid content and braiding process can meet the requirements of various cable lengths.

Features

1. Good mechanical and temperature performance.

2. High-strength loose tube that is resistant to hydrolysis

3. The special tube filling compound ensures critical fiber protection

4. Crush resistance and flexibility

5. The following measures are taken to ensure the cable's watertightness:

6. Single-fiber reinforced plastic as a central strength member

7. Loose Tube Filler Compound

8. 100% cable core filling

Applications

1. Adopted for outdoor aerial self-supporting installation

2. Long-distance communication, local backbone, CATV and computer network system, telecommunications or campus backbone outside plant

3. Ethernet LAN network, CCTV, network camera, PLC

4. Mechanically robust cable design for: Antenna, conduit

Parameters

Photos