High Quality ADSS Fiber Optic Cable - 4 6 8 12 Core Mini ADSS 120m Span with FRP Strength Member – AIXTON

Detail

Mini-ADSS cables are small, self-supporting, all-dielectric, single-jacketed cables designed for aerial installation. The fiber optic cable design (Mini-ADSS) does not require any support structure or messenger wire. Aixton provides a hardware component for installation with the Mini-ADSS cable, which is mounted on the pole. The cable is contained within three multi-loose tubes filled with a water-resistant filler compound or designed to be blocked with water-blocking material on the cable side. The cable is reinforced with high-strength aramid yarns and FRP reinforcing rods. The outer jacket is made of HDPE. The cable is approved according to TISI 2166-2548 standards in Thailand. Standard packaging (wooden): 4,000m/reel.

Features

1. It can be installed without cutting off the power supply;

2. Excellent AT performance, the maximum inductive voltage at the operating point of the AT sheath can reach 25 kV;

3. Lightweight and small diameter which reduces the load caused by ice and wind and the load on towers and supports;

4. Large sections and the largest section is over 300 m;

5. Good tensile strength and temperature performance;

6. The design life is 20 years.

Applications

Adopted for self-supporting outdoor area installation

Long-distance communication, local backbone, CATV and computer networking system, telecommunications or outside plant campus backbone applications

Ethernet LAN network, CCTV, network camera, PLC

Mechanically robust cable design for: Antenna, conduit

Parameter

Photos