Well-designed Cat6 Patch Panel – 250MHz 24AWG UTP Cat6 Rated Copper CMR Bare Wire – AIXTON

DETAIL

The Category 6 cable consists of 4 pairs of solid insulated 24AWG copper and is UL listed with a CM fire resistance rating.

It is designed for use in horizontal cabling situations and is supplied in 305 m (1000 ft) easy-to-remove boxes.

Category 6 cable provides a significant margin above the Category 6 near-end crosstalk minimum. NEXT

ANSI/TIA and ISO/IEC 11801 requirements.

Features

1. More bandwidth than the standard 250MHz is required;

2. Supports the 10 Gigabit Ethernet network transmission requirement;

2. Comply with the RoHS standard;

3. Special or purpose exterior cladding products can be designed according to customer demands.

Physical electrical characteristics:

1. DC resistance (max.): 7.5Ω / 100m at 20ºC;

2. Mutual capacitance (max.): 5.6nF / 100m;

3. Dielectric strength between conductors (min): 2.5kV / 2s;

4. Impedance: 1-100 MHz 100 +/- 15Ω;

5. Differential phase delay (max.): 30ns / 100m;

6. Installation temperature: -20ºC to +60ºC;

7. Permissible bending radius: More than 8 times the cable diameter.

Applications

1.Base-T4
2.100 Base -TX
3.100 Base-VG-ANYLAN
4.155 Mbps ATM
5.622 Mbps ATM
6.1000 Base-T
7.1000 Base-TX
8.10G Base-T

Parameter

Photos