Kebul ɗin Wayar Hannu na OEM G657a - Nau'i 20 Nau'i 50 Nau'i 0.5mm 0.6mm 24awg 23awg Kebul ɗin Wayar Karkashin Ƙasa - AIXTON

Gabatarwar Samfuri

Ana ƙera kebul na wayar tarho na cikin gida na Aixton da na'urorin lantarki masu amfani da kwano ko kuma waɗanda ba a saka su a cikin kwandon ba, da kuma na'urorin PVC masu launuka iri-iri, da kuma jaket ɗin waje na PVC mai launin toka.

Siffofi

Mai Gudanarwa: Tagulla mai ƙarfi mai ƙarfi 0.5 mm bisa ga ƙa'idar Burtaniya ta BS EN 60228.

Rufewa: An rufe masu amfani da wutar lantarki da PVC daidai gwargwado bisa ga BS EN 50290-2-21. Lambar launi ta rufi bisa ga Tebur 1.

Haɗawa: Ana murɗa masu sarrafa wutar lantarki guda biyu tare don samar da biyu.

Tsarin aiki: Ana haɗa adadin nau'i-nau'i da ake buƙata tare bisa ga Tebur 2 don samar da tushen kebul

Kuraje: Ana samar da murfin tef ɗin polyester a kusa da tsakiyar kebul don girman kebul na nau'i-nau'i 8 zuwa sama.

Rufe Kebul: An lulluɓe kebul ɗin da PVC bisa ga BS EN 50290-2-22. An samar da igiyar tsagewa don sauƙin cire kebul.

Aikace-aikace

Waɗannan kebul ɗin sun dace da shigarwa a wurare/gine-gine don amfani da tsarin lambar binary, tsarin rarrabawa na abokin ciniki da kuma tare da daidaitawar lambar bugun jini (PCM), bisa ga hanyoyin gini masu zuwa:

1. Gina Layer: don shigarwa gabaɗaya a harabar abokin ciniki inda ake buƙatar kyakkyawan tsari

2. Gina naúrar nau'i-nau'i 16: don amfani da tsarin lambar binary

3. Gina na'urori guda 20: don amfani da su tare da tsarin rarrabawa na abokin ciniki

4. Gina na'urori guda 30: don amfani da tsarin daidaita lambar bugun jini (PCM)

Sigogi

Hotuna